Woodthane Polyurethane Varnish is a polyurethane alkyd based clear and transparent coating providing exceptional hardness, slip and mar resistance, and water and beverage resistance. Woodthane is available as a high gloss and satin finish.
Woodthane Polyurethane Varnish is a polyurethane alkyd based clear and transparent coating providing exceptional hardness, slip and mar resistance, and water and beverage resistance. Woodthane is available as a high gloss and satin finish.
Prepare substrate by removing all loosely adherent material. Sand down to remove all raised grain, and apply 1 coat of Woodthane Polyurethane Varnish thinned 10% with Mineral Turpentine as a sealer, sand lightly to remove any raised grain and apply 2 coats Woodthane Polyurethane Varnish as supplied.
Woodthane Polyurethane Varnish is supplied ready for use by brush, roller, conventional, or airless spray. Thinning is not recommended, except as directed, when a maximum reduction of 10% with mineral turpentine by volume is recommended, this only for very dry and porous surfaces. Do not apply at temperatures below 10 °C, or above 45°C, or a RH above 80%.
Colour: |
Clear, Pale Clear, Light Oak, Mahogany, Teak |
---|---|
Volume Solids: |
35 % +- 1 |
Drying Time: |
2 hrs @ 25 °C & 50 % RH |
Over coating Time: |
12 – 16 hrs (if dry as above) |
Spreading Rate: |
12 – 15 sq metres per litre per coat |
DFT @ 10 sqm/lt |
25 microns |
Recommended DFT |
75 microns min. of total system |
Solvent for cleaning: |
Mineral Turpentine |