Woodglow Exterior Varnish is a long oil alkyd-based transparent coating containing Ultraviolet absorbing Iron Oxide pigments which together provides superior exterior durability, water resistance and overcoating properties. Woodglow produces a semi-gloss finish. Woodglow Exterior Varnish is suitable for interior and exterior use for all types of timber and composite boards and is available in a range of standard colours.
Cape Town 021 928 2860
Cnr of Jan Smuts & Norton road Beaconvale,Parow Cape Town
Gauteng 011 205 0357
Unit 2, Brands Hatch Close, Kyalami Business Park, Johannesburg
Prepare substrate by removing all loosely adherent material etc. Sand down to remove all raised grain, etc. Apply 1 coat of Woodglow Exterior Varnish thinned 10% with Mineral Turpentine as a sealer, sand lightly to remove any raised grain and apply 2 coats Woodglow Exterior Varnish as supplied.
Woodglow Exterior Varnish is supplied ready for use by brush, roller, or conventional or air less spray. Thinning is not recommended, except as directed, when a maximum reduction of 10% with mineral turpentine by volume is recommended, this only for very dry and porous surfaces. Do not apply at temperatures below 10°C, or above 45°C, or a RH above 80%.
| Colour: |
Clear, Pale Clear, Light Oak, Mahogany, Teak |
|---|---|
| Volume Solids: |
35 % +- 1 |
| Drying Time: |
2 hours @ 25 °C & 50 % RH |
| Over coating Time: |
12 to 16 hours (if drying time is adhered to per above) |
| Spreading Rate: |
12 – 15 square metres per litre per coat |
|
DFT @ 10 sqm/lt |
25 microns |
|
Recommended DFT |
75 microns min. of total system |
| Solvent for cleaning: |
Mineral Turpentine |
