Akrogloss High Gloss Enamel is a long oil alkyd-based coating with a high gloss finish. Akrogloss exhibits excellent exterior durability, surface hardness, weather resistance, and flexibility. Akrogloss is particularly suitable as a topcoat for suitably prepared, primed, and undercoated woodwork, structural steel, cementitious and composition substrates where a robust coating is required. Akrogloss High Gloss Enamel complies with the requirements of SANS 630 Grade 1: 1990.
Cape Town 021 928 2860
Cnr of Jan Smuts & Norton road Beaconvale,Parow Cape Town
Gauteng 011 205 0357
Unit 2, Brands Hatch Close, Kyalami Business Park, Johannesburg
Prepare substrate by removing all loose adherent material. Apply 1 coat of applicable primer (for substrate), 1 coat Universal Undercoat, and 2 coats of Akrogloss High Gloss Enamel to desired colour.
Akrogloss High Gloss Enamel is supplied Ready for Use by brush, spray, or mohair roller. Thinning is not recommended, except when applied by spray, when a maximum reduction of 10% by volume is permissible. Do not apply at temperatures below 10 °C, or above 45 °C, or a RH above 80%, or when the dew point is less than 2°C above ambient.
| Colour: |
Range |
|---|---|
| Volume Solids: |
35 % +- 1 |
| Drying Time: |
4 hrs @ 25 °C & 50 % RH |
| Over coating Time: |
12 to 16 hrs (if drying time adhered to per above) |
| Spreading Rate: |
10 to 12 square metres per litre per coat |
|
DFFT @ 10sqm/lt: |
35 microns per coat |
|
Recommended DFT: |
100 microns min. of total system, incl. primer |
|
Solvent for Cleaning: |
Mineral Turpentine |
